Transfer Case Sprocket – Mopar (68395963aa)

Transfer Case Sprocket transmits drive at a fixed ratio and is matched to its shaft by tooth count and spline. A single tooth difference changes the ratio and surfaces as a speedometer error or a shift complaint.

Replace the Transfer Case Sprocket when tooth faces show pitting, when a whine rises with road speed, or when there is metal in the fluid. Gears wear as a set, so replacing half of one usually brings the noise back.

For this Transfer Case Sprocket the reference is 68395963aa, in our Transfer Cases range. Compare it with the number on the part you are replacing rather than with a photograph.

Genuine MOPAR supplied for this Transfer Case Sprocket, with the engineering number unchanged from the factory reference stamped on the original.