Engine Oil Cooler – Mopar (04893310AB)

Engine Oil Cooler rejects heat from a fluid circuit and is sized for the load the vehicle was built to carry. A physically similar unit with a smaller core will fit and will not hold temperature under sustained load.

Replace the Engine Oil Cooler when temperature climbs under load but stays normal at idle, when two circuits are mixing fluid, or after any repair that put debris into the circuit. A cooler cannot be cleaned once it has trapped clutch or bearing material.

Ordering reference for the Engine Oil Cooler is part number 04893310AB, categorised under Coolers. Match that number against the component you are removing before you order.

This is MOPAR dealer-sourced stock rather than an equivalent, so the number on the Engine Oil Cooler traces straight back to the manufacturer.